Fixed up a whole bunch of undefined variable warnings. Added a check to make sure raspap.auth exists before trying to include it.

includes/dashboard.php

@@ -29,19 +29,19 @@ function DisplayDashboard(){
   $strRxBytes = $result[1];
   preg_match( '/TX Bytes:(\d+ \(\d+.\d+ [K|M|G]iB\))/i',$strWlan0,$result ) || $result[1] = 'No Data';
   $strTxBytes = $result[1];
-  preg_match( '/ESSID:\"([a-zA-Z0-9\s]+)\"/i',$strWlan0,$result );
+  preg_match( '/ESSID:\"([a-zA-Z0-9\s]+)\"/i',$strWlan0,$result ) || $result[1] = 'Not connected';
   $strSSID = str_replace( '"','',$result[1] );
-  preg_match( '/Access Point: ([0-9a-f:]+)/i',$strWlan0,$result );
+  preg_match( '/Access Point: ([0-9a-f:]+)/i',$strWlan0,$result ) || $result[1] = '';
   $strBSSID = $result[1];
-  preg_match( '/Bit Rate=([0-9\.]+ Mb\/s)/i',$strWlan0,$result );
+  preg_match( '/Bit Rate=([0-9\.]+ Mb\/s)/i',$strWlan0,$result ) || $result[1] = '';
   $strBitrate = $result[1];
-  preg_match( '/Tx-Power=([0-9]+ dBm)/i',$strWlan0,$result );
+  preg_match( '/Tx-Power=([0-9]+ dBm)/i',$strWlan0,$result ) || $result[1] = '';
   $strTxPower = $result[1];
-  preg_match( '/Link Quality=([0-9]+)/i',$strWlan0,$result );
+  preg_match( '/Link Quality=([0-9]+)/i',$strWlan0,$result ) || $result[1] = '';
   $strLinkQuality = $result[1];
-  preg_match( '/Signal level=(-?[0-9]+ dBm)/i',$strWlan0,$result );
+  preg_match( '/Signal level=(-?[0-9]+ dBm)/i',$strWlan0,$result ) || $result[1] = '';
   $strSignalLevel = $result[1];
-  preg_match('/Frequency:(\d+.\d+ GHz)/i',$strWlan0,$result);
+  preg_match('/Frequency:(\d+.\d+ GHz)/i',$strWlan0,$result) || $result[1] = '';
   $strFrequency = $result[1];
 
   if(strpos( $strWlan0, "UP" ) !== false && strpos( $strWlan0, "RUNNING" ) !== false ) {

includes/dhcp.php

@@ -78,6 +78,10 @@ function DisplayDHCPConfig() {
   $RangeMask = $arrRange[2];
   preg_match( '/([0-9]*)([a-z])/i', $arrRange[3], $arrRangeLeaseTime );
 
+  $hselected = '';
+  $mselected = '';
+  $dselected = '';
+
   switch( $arrRangeLeaseTime[2] ) {
     case "h":
       $hselected = " selected";

includes/system.php

@@ -65,6 +65,7 @@ function DisplaySystem(){
   if ($minutes != 0) { $uptime .= $minutes . ' minute' . (($minutes > 1)? 's ':' '); }
 
   // mem used
+  $memused_status = "primary";
   exec("free -m | awk '/Mem:/ { total=$2 } /buffers\/cache/ { used=$3 } END { print used/total*100}'", $memarray);
   $memused = floor($memarray[0]);
   if     ($memused > 90) { $memused_status = "danger";  }

index.php

@@ -19,7 +19,11 @@
  */
 
 define('RASPI_CONFIG', '/etc/raspap');
-define('RASPI_ADMIN_DETAILS', RASPI_CONFIG.'/raspap.auth');
+if(file_exists(RASPI_CONFIG.'/raspap.auth')) {
+    define('RASPI_ADMIN_DETAILS', RASPI_CONFIG.'/raspap.auth');
+} else {
+    define('RASPI_ADMIN_DETAILS','');
+}
 
 // Constants for configuration file paths.
 // These are typical for default RPi installs. Modify if needed.

raspap.php

@@ -5,10 +5,11 @@ $config = array(
   'admin_pass' => '$2y$10$YKIyWAmnQLtiJAy6QgHQ.eCpY4m.HCEbiHaTgN6.acNC6bDElzt.i'
 );
 
-if ( $auth_details = fopen(RASPI_CONFIG.'/raspap.auth', 'r') ) {
-  $config['admin_user'] = trim(fgets($auth_details));
-  $config['admin_pass'] = trim(fgets($auth_details));
-  fclose($auth_details);
+if(file_exists(RASPI_CONFIG.'/raspap.auth')) {
+    if ( $auth_details = fopen(RASPI_CONFIG.'/raspap.auth', 'r') ) {
+      $config['admin_user'] = trim(fgets($auth_details));
+      $config['admin_pass'] = trim(fgets($auth_details));
+      fclose($auth_details);
+    }
 }
-
 ?>