session-ios/Scripts/build_libSession_util.sh

#!/bin/bash

# XCode will error during it's dependency graph construction (which happens before the build
# stage starts and any target "Run Script" phases are triggered)
#
# In order to avoid this error we need to build the framework before actually getting to the
# build stage so XCode is able to build the dependency graph
#
# XCode's Pre-action scripts don't output anything into XCode so the only way to emit a useful
# error is to **return a success status** and have the project detect and log the error itself
# then log it, stopping the build at that point
#
# The other step to get this to work properly is to ensure the framework in "Link Binary with
# Libraries" isn't using a relative directory, unfortunately there doesn't seem to be a good
# way to do this directly so we need to modify the '.pbxproj' file directly, updating the
# framework entry to have the following (on a single line):
# {
#   isa = PBXFileReference;
#   explicitFileType = wrapper.xcframework;
#   includeInIndex = 0;
#   path = "{FRAMEWORK NAME GOES HERE}";
#   sourceTree = BUILD_DIR;
# };
#
# Note: We might one day be able to replace this with a local podspec if this GitHub feature
# request ever gets implemented: https://github.com/CocoaPods/CocoaPods/issues/8464

# Need to set the path or we won't find cmake
PATH=${PATH}:/usr/local/bin:/opt/local/bin:/opt/homebrew/bin:/opt/homebrew/opt/m4/bin:/sbin/md5

exec 3>&1 # Save original stdout

# Ensure the build directory exists (in case we need it before XCode creates it)
mkdir -p "${TARGET_BUILD_DIR}/libSessionUtil"

echo "Validating build requirements"

# Ensure the build directory exists (in case we need it before XCode creates it)
mkdir -p "${TARGET_BUILD_DIR}"

if ! which cmake > /dev/null; then
  echo "error: cmake is required to build, please install (can install via homebrew with 'brew install cmake')."
  exit 0
fi

# Check if we have the `LibSession-Util` submodule checked out and if not (depending on the 'SHOULD_AUTO_INIT_SUBMODULES' argument) perform the checkout
if [ ! -d "${SRCROOT}/LibSession-Util" ] || [ ! -d "${SRCROOT}/LibSession-Util/src" ] || [ ! "$(ls -A "${SRCROOT}/LibSession-Util")" ]; then
  echo "error: Need to fetch LibSession-Util submodule (git submodule update --init --recursive)."
  exit 0
else
  are_submodules_valid() {
    local PARENT_PATH=$1
    local RELATIVE_PATH=$2
    
    # Change into the path to check for it's submodules
    cd "${PARENT_PATH}"
    local SUB_MODULE_PATHS=($(git config --file .gitmodules --get-regexp path | awk '{ print $2 }'))

    # If there are no submodules then return success based on whether the folder has any content
    if [ ${#SUB_MODULE_PATHS[@]} -eq 0 ]; then
      if [[ ! -z "$(ls -A "${PARENT_PATH}")" ]]; then
        return 0
      else
        return 1
      fi
    fi

    # Loop through the child submodules and check if they are valid
    for i in "${!SUB_MODULE_PATHS[@]}"; do
      local CHILD_PATH="${SUB_MODULE_PATHS[$i]}"
      
      # If the child path doesn't exist then it's invalid
      if [ ! -d "${PARENT_PATH}/${CHILD_PATH}" ]; then
        echo "Submodule '${RELATIVE_PATH}/${CHILD_PATH}' doesn't exist."
        return 1
      fi

      are_submodules_valid "${PARENT_PATH}/${CHILD_PATH}" "${RELATIVE_PATH}/${CHILD_PATH}"
      local RESULT=$?

      if [ "${RESULT}" -eq 1 ]; then
        echo "Submodule '${RELATIVE_PATH}/${CHILD_PATH}' is in an invalid state."
        return 1
      fi
    done

    return 0
  }

  # Validate the state of the submodules
  are_submodules_valid "${SRCROOT}/LibSession-Util" "LibSession-Util"

  HAS_INVALID_SUBMODULE=$?

  if [ "${HAS_INVALID_SUBMODULE}" -eq 1 ]; then
    echo "error: Submodules are in an invalid state, please delete 'LibSession-Util' and run 'git submodule update --init --recursive'."
    exit 0
  fi
fi

# Generate a hash of the libSession-util source files and check if they differ from the last hash
echo "Checking for changes to source"

NEW_SOURCE_HASH=$(find "${SRCROOT}/LibSession-Util/src" -type f -exec md5 {} + | awk '{print $NF}' | sort | md5 | awk '{print $NF}')
NEW_HEADER_HASH=$(find "${SRCROOT}/LibSession-Util/include" -type f -exec md5 {} + | awk '{print $NF}' | sort | md5 | awk '{print $NF}')
NEW_EXTERNAL_HASH=$(find "${SRCROOT}/LibSession-Util/external" -type f -exec md5 {} + | awk '{print $NF}' | sort | md5 | awk '{print $NF}')

if [ -f "${TARGET_BUILD_DIR}/libSessionUtil/libsession_util_source_hash.log" ]; then
    read -r OLD_SOURCE_HASH < "${TARGET_BUILD_DIR}/libSessionUtil/libsession_util_source_hash.log"
fi

if [ -f "${TARGET_BUILD_DIR}/libSessionUtil/libsession_util_header_hash.log" ]; then
    read -r OLD_HEADER_HASH < "${TARGET_BUILD_DIR}/libSessionUtil/libsession_util_header_hash.log"
fi

if [ -f "${TARGET_BUILD_DIR}/libSessionUtil/libsession_util_external_hash.log" ]; then
    read -r OLD_EXTERNAL_HASH < "${TARGET_BUILD_DIR}/libSessionUtil/libsession_util_external_hash.log"
fi

if [ -f "${TARGET_BUILD_DIR}/libSessionUtil/libsession_util_archs.log" ]; then
    read -r OLD_ARCHS < "${TARGET_BUILD_DIR}/libSessionUtil/libsession_util_archs.log"
fi

# If all of the hashes match, the archs match and there is a library file then we can just stop here
if [ "${NEW_SOURCE_HASH}" == "${OLD_SOURCE_HASH}" ] && [ "${NEW_HEADER_HASH}" == "${OLD_HEADER_HASH}" ] && [ "${NEW_EXTERNAL_HASH}" == "${OLD_EXTERNAL_HASH}" ] && [ "${ARCHS[*]}" == "${OLD_ARCHS}" ] && [ -f "${TARGET_BUILD_DIR}/libSessionUtil/libSessionUtil.a" ]; then
  echo "Build is up-to-date"
  exit 0
fi

# If any of the above differ then we need to rebuild
echo "Build is not up-to-date - creating new build"

# Import settings from XCode (defaulting values if not present)
VALID_SIM_ARCHS=(arm64 x86_64)
VALID_DEVICE_ARCHS=(arm64)
VALID_SIM_ARCH_PLATFORMS=(SIMULATORARM64 SIMULATOR64)
VALID_DEVICE_ARCH_PLATFORMS=(OS64)

OUTPUT_DIR="${TARGET_BUILD_DIR}"
IPHONEOS_DEPLOYMENT_TARGET=${IPHONEOS_DEPLOYMENT_TARGET}
ENABLE_BITCODE=${ENABLE_BITCODE}

# Generate the target architectures we want to build for
TARGET_ARCHS=()
TARGET_PLATFORMS=()
TARGET_SIM_ARCHS=()
TARGET_DEVICE_ARCHS=()

if [ -z $PLATFORM_NAME ] || [ $PLATFORM_NAME = "iphonesimulator" ]; then
    for i in "${!VALID_SIM_ARCHS[@]}"; do
        ARCH="${VALID_SIM_ARCHS[$i]}"
        ARCH_PLATFORM="${VALID_SIM_ARCH_PLATFORMS[$i]}"

        if [[ " ${ARCHS[*]} " =~ " ${ARCH} " ]]; then
            TARGET_ARCHS+=("sim-${ARCH}")
            TARGET_PLATFORMS+=("${ARCH_PLATFORM}")
            TARGET_SIM_ARCHS+=("sim-${ARCH}")
        fi
    done
fi

if [ -z $PLATFORM_NAME ] || [ $PLATFORM_NAME = "iphoneos" ]; then
    for i in "${!VALID_DEVICE_ARCHS[@]}"; do
        ARCH="${VALID_DEVICE_ARCHS[$i]}"
        ARCH_PLATFORM="${VALID_DEVICE_ARCH_PLATFORMS[$i]}"

        if [[ " ${ARCHS[*]} " =~ " ${ARCH} " ]]; then
            TARGET_ARCHS+=("ios-${ARCH}")
            TARGET_PLATFORMS+=("${ARCH_PLATFORM}")
            TARGET_DEVICE_ARCHS+=("ios-${ARCH}")
        fi
    done
fi

# Remove any old build logs (since we are doing a new build)
rm -rf "${TARGET_BUILD_DIR}/libSessionUtil/libsession_util_output.log"

submodule_check=ON

if [ "$CONFIGURATION" == "Debug" ]; then
    submodule_check=OFF
fi

# Build the individual architectures
for i in "${!TARGET_ARCHS[@]}"; do
    build="${TARGET_BUILD_DIR}/libSessionUtil/${TARGET_ARCHS[$i]}"
    platform="${TARGET_PLATFORMS[$i]}"
    log_file="${TARGET_BUILD_DIR}/libSessionUtil/libsession_util_output.log"
    echo "Building ${TARGET_ARCHS[$i]} for $platform in $build"
    
    # Redirect the build output to a log file and only include the progress lines in the XCode output
    exec > >(tee "$log_file" | grep --line-buffered '^\[.*%\]') 2>&1

    cd "${SRCROOT}/LibSession-Util"
    env -i PATH="$PATH" SDKROOT="$(xcrun --sdk macosx --show-sdk-path)" \
        ./utils/static-bundle.sh "$build" "" \
        -DCMAKE_TOOLCHAIN_FILE="${SRCROOT}/LibSession-Util/external/ios-cmake/ios.toolchain.cmake" \
        -DPLATFORM=$platform \
        -DDEPLOYMENT_TARGET=$IPHONEOS_DEPLOYMENT_TARGET \
        -DENABLE_BITCODE=$ENABLE_BITCODE \
        -DBUILD_TESTS=OFF \
        -DBUILD_STATIC_DEPS=ON \
        -DSUBMODULE_CHECK=$submodule_check

    # Capture the exit status of the ./utils/static-bundle.sh command
    EXIT_STATUS=$?
        
    # Flush the tee buffer (ensure any errors have been properly written to the log before continuing) and
    # restore stdout
    echo ""
    exec 1>&3

    # Retrieve and log any submodule errors/warnings
    ALL_CMAKE_ERROR_LINES=($(grep -nE "CMake Error" "$log_file" | cut -d ":" -f 1))
    ALL_SUBMODULE_ISSUE_LINES=($(grep -nE "\s*Submodule '([^']+)' is not up-to-date" "$log_file" | cut -d ":" -f 1))
    ALL_CMAKE_ERROR_LINES_STR=" ${ALL_CMAKE_ERROR_LINES[*]} "
    ALL_SUBMODULE_ISSUE_LINES_STR=" ${ALL_SUBMODULE_ISSUE_LINES[*]} "

    for i in "${!ALL_SUBMODULE_ISSUE_LINES[@]}"; do
      line="${ALL_SUBMODULE_ISSUE_LINES[$i]}"
      prev_line=$((line - 1))
      value=$(sed "${line}q;d" "$log_file" | sed -E "s/.*Submodule '([^']+)'.*/Submodule '\1' is not up-to-date./")
      
      if [[ "$ALL_CMAKE_ERROR_LINES_STR" == *" $prev_line "* ]]; then
        echo "error: $value"
      else
        echo "warning: $value"
      fi
    done

    if [ $EXIT_STATUS -ne 0 ]; then
      ALL_ERROR_LINES=($(grep -n "error:" "$log_file" | cut -d ":" -f 1))

      # Log any other errors
      for e in "${!ALL_ERROR_LINES[@]}"; do
        error_line="${ALL_ERROR_LINES[$e]}"
        error=$(sed "${error_line}q;d" "$log_file")

        # If it was a CMake Error then the actual error will be on the next line so we want to append that info
        if [[ $error == *'CMake Error'* ]]; then
            actual_error_line=$((error_line + 1))
            error="${error}$(sed "${actual_error_line}q;d" "$log_file")"
        fi

        # Exclude the 'ALL_ERROR_LINES' line and the 'grep' line
        if [[ ! $error == *'grep -n "error'* ]] && [[ ! $error == *'grep -n error'* ]]; then
            echo "error: $error"
        fi
      done
      exit 1
    fi
done

# Remove the old static library file
rm -rf "${TARGET_BUILD_DIR}/libSessionUtil/libSessionUtil.a"
rm -rf "${TARGET_BUILD_DIR}/libSessionUtil/Headers"

# If needed combine simulator builds into a multi-arch lib
if [ "${#TARGET_SIM_ARCHS[@]}" -eq "1" ]; then
    # Single device build
    cp "${TARGET_BUILD_DIR}/libSessionUtil/${TARGET_SIM_ARCHS[0]}/libsession-util.a" "${TARGET_BUILD_DIR}/libSessionUtil/libSessionUtil.a"
elif [ "${#TARGET_SIM_ARCHS[@]}" -gt "1" ]; then
    # Combine multiple device builds into a multi-arch lib
    echo "Built multiple architectures, merging into single static library"
    lipo -create "${TARGET_BUILD_DIR}/libSessionUtil"/sim-*/libsession-util.a -output "${TARGET_BUILD_DIR}/libSessionUtil/libSessionUtil.a"
fi

# If needed combine device builds into a multi-arch lib
if [ "${#TARGET_DEVICE_ARCHS[@]}" -eq "1" ]; then
    cp "${TARGET_BUILD_DIR}/libSessionUtil/${TARGET_DEVICE_ARCHS[0]}/libsession-util.a" "${TARGET_BUILD_DIR}/libSessionUtil/libSessionUtil.a"
elif [ "${#TARGET_DEVICE_ARCHS[@]}" -gt "1" ]; then
    # Combine multiple device builds into a multi-arch lib
    echo "Built multiple architectures, merging into single static library"
    lipo -create "${TARGET_BUILD_DIR}/libSessionUtil"/ios-*/libsession-util.a -output "${TARGET_BUILD_DIR}/libSessionUtil/libSessionUtil.a"
fi

# Save the updated hashes to disk to prevent rebuilds when there were no changes
echo "${NEW_SOURCE_HASH}" > "${TARGET_BUILD_DIR}/libSessionUtil/libsession_util_source_hash.log"
echo "${NEW_HEADER_HASH}" > "${TARGET_BUILD_DIR}/libSessionUtil/libsession_util_header_hash.log"
echo "${ARCHS[*]}" > "${TARGET_BUILD_DIR}/libSessionUtil/libsession_util_archs.log"
echo "Build complete"

# Copy the headers across
echo "Copy headers and prepare modulemap"
mkdir -p "${TARGET_BUILD_DIR}/libSessionUtil/Headers"
cp -r "${SRCROOT}/LibSession-Util/include/session" "${TARGET_BUILD_DIR}/libSessionUtil/Headers"

# The 'module.modulemap' is needed for XCode to be able to find the headers
modmap="${TARGET_BUILD_DIR}/libSessionUtil/Headers/module.modulemap"
echo "module SessionUtil {" >"$modmap"
echo "  module capi {" >>"$modmap"
for x in $(cd "${TARGET_BUILD_DIR}/libSessionUtil/Headers" && find session -name '*.h'); do
    echo "    header \"$x\"" >>"$modmap"
done
echo -e "    export *\n  }" >>"$modmap"
echo "}" >>"$modmap"

# Output to XCode just so the output is good
echo "libSession is Ready"