If code includes a linkname directive pointing at a name in an imported
package, like:
//go:linkname localName importedpackage.RemoteName
func localName()
We should rewrite the comment to replace "RemoteName" with its
obfuscated counterpart, if the package in question was obfuscated and
that name was as well.
We already had some code to handle linkname directives, but only to
ensure that "localName" was never obfuscated. This behavior is kept, to
ensure that the directive applies to the right name. In the future, we
could instead rewrite "localName" in the directive, like we do with
"RemoteName".
Add plenty of tests, too. The linkname directive used to be tested in
imports.txt and syntax.txt, but that was hard to maintain as each file
tested different edge cases.
Now that we have build caching, adding one extra testscript file isn't a
big problem anymoree. Add linkname.txt, which is self-explanatory. The
other two scripts also get a bit less complex.
Fixes#197.
It turns out that the modules we include in testdata/mod via
txtar-addmod don't result in the same h1 hash that one gets when using
proxy.golang.org.
As proof:
$ go clean -modcache && go get -d rsc.io/quote@v1.5.2 && go test -short
[...]
--- FAIL: TestScripts/imports (0.06s)
> garble build -tags buildtag
go list error: exit status 1: verifying rsc.io/quote@v1.5.2: checksum mismatch
downloaded: h1:w5fcysjrx7yqtD/aO+QwRjYZOKnaM9Uh2b40tElTs3Y=
go.sum: h1:3fEykkD9k7lYzXqCYrwGAf7iNhbk4yCjHmKBN9td4L0=
The added comment explains the situation in detail.
For now, simply work around the issue by not sharing GOMODCACHE with the
host.
Previously, we were never obfuscating runtime and its direct
dependencies. Unfortunately, due to linkname, the runtime package is
actually closely related to dozens of other std packages as well.
Until we can obfuscate the runtime and properly support go:linkname
directives, obfuscating fewer std packages is a better outcome than
breaking and not producing any obfuscated code at all.
The added test case is building runtime/pprof, which used to cause
failures:
# runtime/pprof
/go/src/runtime/pprof/label.go:27:21: undefined: context.Context
/go/src/runtime/pprof/label.go:59:21: undefined: context.Context
/go/src/runtime/pprof/label.go:93:16: undefined: context.Context
/go/src/runtime/pprof/label.go:101:20: undefined: context.Context
The net package was also very close to obfuscating properly thanks to
this change, so its test is now run as well. The only other remaining
fix was to not obfuscate fields on cgo types, since those aren't
obfuscated at the moment.
The map is pretty long, but it's only a temporary solution and the
command to obtain the list again is included. Never obfuscating the
entire std library is also an option, but it's a bit unnecessary.
Fixes#134.
Previously garble heavily used env vars to share data between processes.
This also makes it easy to share complex data between processes.
The complexity of main.go is considerably reduced.
* Use latest Binject/debug version to support importmap directives in the importcfg file
* Uncomment line in goprivate testscript to test ImportMap
* Fixed issue where a package in specified in importmap would be hashed differently in a package that imported it, due to the mapping of import paths.
Also commented out the 'net' import in the goprivate testscript (again) due to cgo compile errors
We also update the "original types importer" to support ImportMap.
The test now gets further along, no longer getting stuck on "path not
found in listed packages". Instead, we get stuck on:
error parsing importcfg: <...>/importcfg:2: unknown directive "importmap"
This bug has been filed at https://github.com/Binject/debug/issues/17.
Until it's fixed, we can't really proceed on #146, so the net import in
the test file (which triggers this case) is commented out for now.
Updates #146.
In Go 1.15, if a dependency is required but not listed in go.mod/go.sum,
it's resolved and added automatically.
This is changing in 1.16. From that release, one will have to explicitly
update the mod files via 'go mod tidy' or 'go get'.
To get ahead of the curve, start using -mod=readonly to get the same
behavior in 1.15, and fix all existing tests.
The only tests that failed were imports.txt and syntax.txt, the only
ones to require other modules. But since we're here, let's add the 'go'
line to all go.mod files as well.
That is, a package that is built without obfuscation imports an
obfuscated package. This will result in confusing compilation error
messages, because the importer can't find the exported names from the
imported package by their non-obfuscated names:
> ! garble build ./importer
[stderr]
# test/main/importer
importer/importer.go:5:9: undefined: imported.Name
exit status 2
Instead, detect this bad input case and provide a nice error:
public package "test/main/importer" can't depend on obfuscated package "test/main/imported" (matched via GOPRIVATE="test/main/imported")
For now, this is by design. It also makes little sense for a public
package to import an obfuscated package in general, because the public
package would have to leak details about the private package's API and
behavior.
While at it, fix a quirk where we thought the unsafe package could be
private. It can't be, because the runtime package is always public and
it imports the runtime package:
public package "internal/bytealg" can't depend on obfuscated package "unsafe" (matched via GOPRIVATE="*")
Instead of trying to obfuscate "unsafe" and doing nothing, simply add it
to the neverPrivate list, which is also a better name than
"privateBlacklist" (for #169).
Fixes#164.
Co-authored-by: lu4p <lu4p@pm.me>
By avoiding the fmt import, we save some work: 'go test -run Script/tiny'
goes down from 0.8s to 0.5s even with a warm build cache.
Since the output changes between runs, we use stderr grep lines instead
of cmp. This way we can also check that the "oh noes" panic is entirely
hidden in the tiny mode.
We can use println instead of fmt.Println. Similarly, we can avoid
strings.Join by just appending bytes to a []byte.
This is less important now that we have build caching, but it still
helps to do less work overall and link smaller binaries.
Reduces 'go test -run Script/init' from 0.5s to 0.3s on my laptop.
Also, properly format the Go in that file, since the space indentation
wasn't noticed during code review. We might want to enforce gofmt in Go
files within txtar files if this keeps happening.
* fix bug where structs would get garbled in some packages but not in others
* only check if struct/field was not defined in current package
* fix a related bug when two objects share the same name in the same package and one is garbled but the other one is not
* renamed parameter for clarity
Use a static main.stderr file, like in the other tests. This means we
don't need to always start the test with a 'go build', and the output is
also obvious by just reading the txtar file.
We can also move generate-literals to a later stage, so that 'go test
-short' needs to do even less work.
'go test -short -run Script/literals' drops from ~0.4s to ~0.2s on my
laptop.
Finally, make the printing of byte lists not use trailing spaces, so
that the txtar file itself doesn't have trailing whitespace in its lines
either.
Fixes#103.
The test intended to use an extra module to be obfuscated, rsc.io/quote,
which we were bundling in the local proxy as well. Unfortunately, the
use of GOPRIVATE also meant that we did not actually fetch the module
from the proxy, and we would instead do a full roundtrip to the internet
to "git clone" the actual upstream repository.
To prevent that roundtrip, instead use a locally replaced module. This
fits the syntax.txt test too, since it's one more edge case that we want
to make sure works well with garble. Since rsc.io/quote is used in
another test, simply make up our own tiny module.
Reduces a 'go test -run Syntax/syntax' run with warm cache from ~5s to
~0.5s, thanks to removing the multiple roundtrips. A warm 'go test' run
still sits at ~6s, since we still need that much CPU time in total.
While at it, fix a staticcheck warning and fix inconsistent indentation
in a couple of tests.
As per the discussion in https://github.com/golang/go/issues/41145, it
turns out that we don't need special support for build caching in
-toolexec. We can simply modify the behavior of "[...]/compile -V=full"
and "[...]/link -V=full" so that they include garble's own version and
options in the printed build ID.
The part of the build ID that matters is the last, since it's the
"content ID" which is used to work out whether there is a need to redo
the action (build) or not. Since cmd/go parses the last word in the
output as "buildID=...", we simply add "+garble buildID=_/_/_/${hash}".
The slashes let us imitate a full binary build ID, but we assume that
the other components such as the action ID are not necessary, since the
only reader here is cmd/go and it only consumes the content ID.
The reported content ID includes the tool's original content ID,
garble's own content ID from the built binary, and the garble options
which modify how we obfuscate code. If any of the three changes, we
should use a different build cache key. GOPRIVATE also affects caching,
since a different GOPRIVATE value means that we might have to garble a
different set of packages.
Include tests, which mainly check that 'garble build -v' prints package
lines when we expect to always need to rebuild packages, and that it
prints nothing when we should be reusing the build cache even when the
built binary is missing.
After this change, 'go test' on Go 1.15.2 stabilizes at about 8s on my
machine, whereas it used to be at around 25s before.
More correct comments transformation was implemented.
Added processing of //go:linkname localname [importpath.name] directive, now localname is not renamed. This is safe and does not cause a name disclosure because the functions marked //linkname do not have a name in the resulting binary.
Added cgo directives support
Fixed filename leak protection for cgo
Part of #149
Fix for bug when a conflict occurred between generated short names
and local variables/functions/types/structs.
The already existing names are collected and if the generated short name
already exists, the package counter is increased until a free name is found.
Part of #149.
Added cleanup of the Comment field.
In some cases, the appearance of a comment in a random place
may break the compilation (e.g. cgo and runtime package).
This is safe because the Comment field cannot contain any directives.
Part of #149.
In tiny.txt, we already check line numbers via stderr, so there's no
need to do that via -debugdir.
In syntax.txt, we only really care about what names remain in the
binary, not the names which remain in the source but don't affect the
binary.
These changes are important because -debugdir adds a non-trivial amount
of work, which will impede build caching once that feature lands. We
will likely make -debugdir support build caching eventually, but for
now, this preliminary change will make 'go test' much faster with build
caching.
And of course, the tests get simpler, which is nice.
Many files were missing copyright, so also add a short script to add the
missing lines with the current year, and run it.
The AUTHORS file is also self-explanatory. Contributors can add
themselves there, or we can simply update it from time to time via
git-shortlog.
Since we have two scripts now, set up a directory for them.
Rework the features section in the README, leaving optional features at
the end of the list. Simplify the caveats list, too; the build cache and
exported field/method bits only need one point each. Overall, the
section was far too wordy for little reason.
Also redo the help text a bit. There's now a line to briefly introduce
the tool, as well as a link to the README with all the details. Finally,
the flags have shorter and more consistent help strings.
While at it, remove two unused global vars as spotted by staticcheck.
Finally, finally this is done. This allows import paths to be obfuscated by modifying
object/archive files and garbling import paths contained within. The bulk of the
code that makes parsing and writing Go object/archive files possible lives at
https://github.com/Binject/debug/tree/master/goobj2, which I wrote as well.
I have tested by garbling and checking for import paths via strings and grep
(in order of difficulty) https://github.com/lu4p/binclude, garble itself, and
https://github.com/dominikh/go-tools/tree/master/cmd/staticcheck.
This only supports object/archive files produced from the Go 1.15 compiler.
The object file format changed at 1.15, and 1.14 and earlier is not supported.
Fixes#13.
This is important, because it would mean that we would obfuscate
nothing. At best, it would be confusing; at worst, it could mislead
the user into thinking the binary is obfuscated.
Fixes#20.
Updates #108.
This shouldn't break often, so it doesn't need to be covered by 'go test
-short'. Moreover, it's still a relatively expensive step, since we end
up reaching package compilation.
basic.txt just builds main.go without a module. Similarly, we leave
imports.txt without a GOPRIVATE, to test the 'go list -m' fallback.
For all other tests, explicitly set GOPRIVATE, to avoid two exec calls -
both 'go env GOPRIVATE' as well as 'go list -m'. Each of those calls
takes in the order of 10ms, so saving ~26 exec calls should easily add
to 200-300ms saved from 'go test -short'.
Error strings should never be capitalized.
A binsubstr line in one of the tests was duplicate and thus useless.
Remove duplicate or trailing spaces in test scripts.
Finally, add a TODO for an optimization I just spotted.
Fixes #2.
Line numbers are now obfuscated, via `//line` comments.
Filenames are now obfuscated via `//line` comments, instead of changing the actual filename.
New flag `-tiny` to reduce the binary size, at the cost of reversibility.
Fixes#93.
The second typecheck lead to the creation of different type objects,
which didn't match the types in the blacklist anymore.
It turns out we don't need the second typecheck,
therfore it is now removed.
Like other tests, importing fmt results in quite a lot of extra work,
due to the lack of build caching.
In this particular test, we wanted fmt.Println so that T.String would be
called in an indirect way, without defining or referencing Stringer
interface in the main package.
We can do that by rolling our own "tinyfmt" package in a dozen or so
lines of code.
Below is how 'go test -short -vet=off -run Script/implement' is
affected, measured via benchcmd and benchstat:
name old time/op new time/op delta
GoTestScriptImplement 3.67s ± 9% 2.65s ±11% -27.68% (p=0.008 n=5+5)
name old user-time/op new user-time/op delta
GoTestScriptImplement 8.18s ± 4% 4.55s ± 9% -44.35% (p=0.008 n=5+5)
name old sys-time/op new sys-time/op delta
GoTestScriptImplement 1.27s ±12% 0.71s ±13% -44.07% (p=0.008 n=5+5)
name old peak-RSS-bytes new peak-RSS-bytes delta
GoTestScriptImplement 145MB ± 1% 145MB ± 2% ~ (p=1.000 n=5+5)
All in all, we shave about one full second. It doesn't seem to affect
the total 'go test -short' noticeably, but every little bit counts.
The test case we had didn't have a realistic-looking module path with a
dot, so we hadn't noticed the bug with IndexByte.
Fix that. We verified that the new test fails if we undo the fix.
Otherwise any build flags like -tags won't be used, and we might easily
end up with errors or incorrect packages.
The common case with -tags is covered by one of the integration test
scripts. On top of that, we add a table-driven unit test to cover all
edge cases, since there are many we can do quickly in a unit test.
Fixes#82.
We don't really care about tools other than "compile" and "link". Stop
trying to keep a complete list.
Use "if err := f(); err != nil {" where it makes sense.
Simplify some declarations, and use a better variable name than "fW".
Instead of doing a 'go list' call every time we need to fetch a
dependency's export file, we now do a single 'go list' call before the
build begins. With the '-deps' flag, it gives us all the dependency
packages recursively.
We store that data in the gob format in a temporary file, and share it
with the future garble sub-processes via an env var.
This required lazy parsing of flags for the 'build' and 'test' commands,
since now we need to run 'go list' with the same package pattern
arguments.
Fixes#63.
The following identifiers are now skipped,
because they never show up in the binary:
- constant identifiers
- identifiers of local variables
(includes function params and named returns)
- identifiers of local types
Implement a literal obfuscator interface,
to allow the easy addition of new encodings.
Add literal obfuscation for byte literals.
Choose a random obfuscator on literal obfuscation,
useful when multiple obfuscators are implemented.
Fixes#62
Injected functions were mistaken for functions implemented outside go.
Asm functions:
obj.Scope().Pos() == 0
obj.Scope().End() == 0
Injected functions:
obj.Scope().Pos() == 0
obj.Scope().End() == 1
We now check for the End instead of the Pos.
This requires a bit of extra magic to replace one constant in
runtime/internal/sys, but that was simple enough given that we can reuse
a lot of the code to parse the files and write them to a temporary dir.
We can also drop the -X flags, as runtime.buildVersion is based on the
constant that we replace here.
Fixes#44, again.
Whilst it may not be particularly common, it is legal to embed fields
where the type has universe scope (e.g. int, error, etc). This can
cause a panic in 2 difference places:
- When embedding `error`, a named type is resolved but the package is
nil. The call to `pkg.Name()` results in a panic
- When embedding a basic type such as `int`, no named type is resolved
at all. The call to `namedType(obj.Type()).Obj()` results in a panic
I'm assuming it is OK to return early when a named type cannot be
resolved.. we could let it continue but I think `pkg` should be set to
nil to be correct, so it'd end up returning straight away anyway.
Since we introduced $GARBLE_DIR, we stopped recommending the use of
toolexec directly. It's still possible to set up the right flags and env
vars, but that will be a moving target.
In particular, string obfuscation in #16 will require using $GARBLE_DIR
in more scenarios. A work-in-progress patch for string obfuscation
triggered this test script to start failing for the reason above.
While at it, we don't care about what the second build contains, since
we already compare it with the previous build.
In the added test, the unexported field used to be garbled.
Reflection can only reach exported methods, exported fields, and
unexported fields. Exported methods and fields are currently never
garbled, so unexported fields was the only missing piece.
Also remove the -toolexec equivalent, as it's becoming longer now that
we have GARBLE_DIR, and it might become out of date in the future again.
We don't want users to assume it will work forever.
Carefully select a default that will do the right thing when inside a
module, as well as when building ad-hoc packages.
This means we no longer need to look at the compiler's -std flag, which
is nice.
Also replace foo.com/ with test/, as per golang/go#37641.
Fixes#7.
Spotted while trying to link a program using unix.Syscall, since its
implementation is assembly.
Telling if a function couldn't be garbled isn't trivial. If that
function belongs to an imported package, we only load its export data
instead of type-checking from source, so we don't have all the
information needed.
Instead, use the gc export data importer to import two versions of each
dependency: its original version, for the initial type-checking, and its
garbled version, to check if any of its exported names weren't garbled.
Updates #9.
We use 'go list -json -export' to locate required modules. This works
fine to locate direct module dependencies; since we're building in the
current module, we run 'go list' in the correct directory.
However, if we're building one of those module dependencies, and it has
other module dependencies of its own, we would fail with cryptic errors
like:
typecheck error: [...] go list error: updates to go.sum needed, disabled by -mod=readonly
This is because we would try to run 'go list' outside of the main
module, probably inside the module cache. Instead, use a $GARBLE_DIR env
var from the top-level 'garble build' call to always run 'go list' in
the original directory.
We add a few small modules to properly test this.
Updates #9.
In the added test case, we'd see a failure, since we garbled the name of
the "Embedded" type but not its use as an anonymous field. Garble both.
This might possibly break some reflect code, but it doesn't seem like we
have an option. When we garble a type, it's impossible to tell if it's
going to be used as an anonymous field later.
Updates #9.
The problem with the "grep" built-in command is that it prints the
entire data if there is an error. We don't want megabytes of binary
output for a test.
Daniel Martí
lu4p
Andrew LeFevre
pagran
pagran
Nicholas Jones